Phil tm Spoke  Cutting & Threading Machine

  The Phil Spoke Cutting & Threading Machine is designed and manufactured to provide an invaluable tool to manually cut and place a factory quality thread on a spoke within just a few seconds.  The machine performs its functions through the operation of a manual crank.  One revolution of the machine’s handle performs the functions of spoke cutting and threading.  The machine is designed to cut and thread 1,8mm and 2,0mm (15 & 14 gage) spokes and place 10mm of 56 TPI thread on the end of the spoke.  Butted and aero spokes may be cut and threaded on that portion of the spoke that is full diameter.  Rolling the thread on the end of the spoke does not remove material as would occur if the thread were cut on the spoke.  The thread is cold forged onto the spoke.  It is recommended that high quality spokes be matched with this machine - such as Phil Stainless Steel Spokes.  The machine is very capable of forging threads on all standard and exotic metal spokes including the multi-colored titanium and the black stainless steel spokes.

Spoke Cutting & Threading Machine

• Cuts & threads a spoke to the desired length
• Threads are rolled “cold forged” for maximum strength
• Butted and aero spokes can be cut and threaded on the full diameter portion of the spoke
• Fully capable of handling carbon steel, stainless steel, titanium, and other exotic metals
• Capable of cutting and threading plated spokes